LeadDuo – Service Business SoftwareLeadDuo
Sign InSign Up
Back to Calculators
🧮LeadDuo Calculator

Electrician Cost Calculator

Price any electrical job with confidence. Add your service call fee, labor, materials, markup, and permits to see a profitable job total — and the deposit to collect.

Try one

Electrical Job Cost Calculator

Enter the job details to build a profitable, customer-ready total.

Estimated Job Total

$394
Labor Cost$200
Materials (with markup)$94
Effective $/Hour$197
Suggested 50% Deposit$197
Sign up & create your quoteCreate a quote for this amount

Join 500+ contractors and service pros

Estimates are for planning only. Actual pricing depends on site conditions.

What you’ll get from this calculator

  • Most electricians charge a $75–$150 service call fee plus $50–$130/hour in labor, with a 15–35% markup on materials.
  • Typical job totals: outlet or switch install $130–$300; ceiling fan $150–$350; 200-amp panel upgrade $1,800–$3,500; EV charger install $700–$1,500.
  • A profitable quote = service call fee + (labor hours × hourly rate) + materials with markup + permit fees.
  • Collect a 50% deposit on jobs over $1,000 (panel upgrades, rewiring, EV chargers) to protect your cash flow.

How to Price an Electrical Job

Every electrical job has four cost buckets: the trip to get there, the time on site, the materials you install, and any permits or inspections. Price all four and add a margin, or you end up working for free on the parts you forgot to charge for.

Start with a service call (or trip) fee that covers showing up and diagnosing the problem. Add labor at your true hourly rate — not the wage you pay, but the burdened rate that covers your truck, insurance, license, and overhead. Then add materials at your cost plus a markup, and pass through permit and inspection fees at cost.

The Electrician Pricing Formula

Job Total = Service Call Fee + (Labor Hours × Hourly Rate) + (Materials Cost × (1 + Markup)) + Permit Fees

Example: a 200-amp panel upgrade with a $100 service call, 8 labor hours at $110/hour, $700 in materials at 25% markup, and a $120 permit comes to $100 + $880 + $875 + $120 = $1,975. On a job this size, collect a 50% deposit ($988) before you start.

Typical 2026 Electrical Job Prices (U.S.)

  • Outlet or switch install: $130–$300
  • GFCI outlet install: $150–$300
  • Ceiling fan install (with existing wiring): $150–$350
  • Light fixture install: $120–$300
  • Whole-house surge protector: $300–$700
  • 200-amp panel upgrade: $1,800–$3,500
  • EV charger install (Level 2): $700–$1,500
  • Whole-home rewire (per home): $8,000–$15,000
  • Always adjust ±20–40% for your local market and the home's age and access.

Electrician Cost FAQs

How much do electricians charge per hour in 2026?▼
Most U.S. electricians charge $50–$130 per hour for labor, with an average around $100/hour. Master electricians and licensed contractors in high-cost metros bill at the top of that range. Your hourly rate should be the burdened rate that covers your truck, license, insurance, and overhead — not just the wage you pay a tech.
What is a typical electrician service call fee?▼
Electrician service call (or trip) fees usually run $75–$150 for standard hours and $150–$300 for emergency or after-hours calls. The fee covers dispatching a licensed electrician to diagnose the problem. Many electricians credit the service call fee toward the job if the customer approves the repair.
How much should I mark up electrical materials?▼
A 15–35% markup on materials is standard for electrical work, with 25% being a common middle ground. Markup covers the time you spend sourcing, picking up, stocking, and warrantying parts. On large material orders (panels, EV chargers, wire by the spool) you can use a lower percentage because the dollar amount is already substantial.
How much does it cost to upgrade an electrical panel?▼
A 200-amp panel upgrade typically costs $1,800–$3,500 installed, depending on whether the meter base, service entrance, and grounding need to be updated and whether the utility has to be involved. Always pull a permit and include the panel make/model and amperage on your quote.
Should I collect a deposit on electrical jobs?▼
Yes — for any job over about $1,000 (panel upgrades, rewiring, EV charger installs), collect a 50% deposit before you start to cover materials and protect your cash flow. Small residential jobs like outlets and fixtures are usually billed on completion.
How do electricians handle permit costs?▼
List electrical permits as a separate line item at cost, then pass them through to the customer. Panel upgrades, new circuits, service changes, and EV chargers almost always require a permit and inspection. Include the permit number and inspection status on the final invoice.
Can the AI fill out this calculator from a description?▼
Yes — type something like '$100 service call, 8 hours at $110, $700 materials, 25% markup, $120 permit' in the AI bar and the calculator auto-fills every field and shows the job total plus the deposit to collect.

Quote and Invoice Electrical Jobs in One Place

ServiceHub turns these numbers into a branded quote your customer can approve online, then into a scheduled job and an invoice — no spreadsheets.

Start Free Trial Learn more about ServiceHub

Join 500+ contractors and service pros

Related Resources

📝Electrician Pricing Guide📝How Much Do Electricians Charge Per Hour? (2026)📝Outlet & Switch Installation Cost (2026)📝Electrical Panel Replacement Cost (2026)📄Electrician Price List Template🔗Electrical Estimate Generator📄Electrician Invoice Template📄Electrician Service Agreement Template🔗Electrical Invoice Generator💳Won the job? Turn your quote into an invoice